• Casting
  • Flexible Carpet Backing
  • Rollers
  • Skate Wheels
  • Wheels


  • Flexible Elastomeric Urethanes


  • Water Based
  • Easy to Apply
  • Economical
  • Fast Air Cure
  • Improved Part Appearance
  • No Buildup
  • No Migration
  • Nonstaining
  • Reduced Rejection Rate

MAC 716 Semi-Permanent Release Agent for Cast Urethane Parts


MAC-716 is a production proven, semi-permanent release agent for molded polyurethane parts. It provides fast, easy part removal with no transfer and multiple release cycles per application. The product is suitable for use with cast urethane, foams, integral skin, as well as polyester and epoxy materials.

Technical Data:

  • Color and appearance................White Emulsion
  • Dispersing medium....................Water
  • Specific gravity..........................1.0
  • Weight per gallon (lbs.)..............8.32

Application Method:

    MAC-716 should be applied to a clean, dry surface. All previously used release coatings should be removed by an appropriate method. McLube Mold Cleaner may be used. Spray a thin, even film of MAC-716 over the entire surface to be coated and allow to dry. Reapply as required. No baking is necessary.

Safety and Handling:

  • The Safety Data Sheet for MAC-716 should be reviewed prior to using the product.
  • MAC-716, being water based, has a low order of toxicity.
  • Care should be taken that good industrial handling practices are used. Safety glasses and gloves are recommended when using this product.
  • Freezing of the product should be avoided.


Gallon Container, 5 Gallon Pail, 55 Gallon Drums, 275 Gallon Totes


For expert technical assistance in selecting the optimum product to meet your specific requirements and to be convinced of the benefits of McLube lubricant coatings, we recommend you evaluate the appropriate product under your specific conditions. Samples and technical assistance are available, as well as custom formulations that suggest themselves for a specific application.