• All Molding Processes
  • All Rubber Parts
  • Compression Molding
  • Injection Molding
  • Transfer Molding


  • ECO
  • FKM
  • EPDM
  • Silicone Rubber
  • Organic Rubber Compounds
  • Composites
  • Glass


  • Water Based
  • Excellent Flow Properties
  • Multiple Release Cycles
  • No Transfer
  • Semi-Permanent

MAC 1194 - Semi-perm. Mold Release Agent


MAC-1194 is an aqueous fluoropolymer solution that will not settle-out. It will provide a durable, semi-permanent release film without transferring to the molded product.

Technical Data:

  • Color and appearance - Clear, yellow solution
  • Dispersing medium - Water
  • Specific gravity - 1.0
  • Weight per gallon (lbs.) - 8.32

Application Method:

    MAC-1194 should be used as delivered but can be diluted (1-part product : 2-parts water). Apply the product or dilution to a clean, dry mold free of previous release coatings, waxes and oils. We recommend the use of a cleaning solvent to prep your mold. Without a clean mold, MAC-1194 will not appropriately adhere to the mold surface. MAC-1194 should be applied to a hot mold surface, 200ºF (93ºC) or higher, to facilitate evaporation of the base. To assure complete coverage, a second coat is recommended.

Safety and Handling:

    Review the Safety Data Sheets prior to use. MAC-1194 has a low order of toxicity, however, operators should still exercise caution. Safety glasses and gloves are recommended when using this product. Keep from freezing.


1-gallon, 5-gallon pail, 55-gallon drum


For expert technical assistance in selecting the optimum product to meet your specific requirements and to be convinced of the benefits of McLube lubricant coatings, we recommend you evaluate the appropriate product under your specific conditions. Samples and technical assistance are available, as well as custom formulations that suggest themselves for a specific application.