• Cured Rubber Parts
  • Pellets
  • Slugs
  • Uncured Rubber


  • SBR
  • EPDM
  • CPE
  • Natural Rubber
  • Nitrile
  • Butyl


  • Water Based
  • Clear Colorless Coating
  • Excellent Anti-stick Properties

McLube 1829 Anti-Stick Coating


Water based fluorochemical emulsion. General purpose release and anti-stick coating. Cost effective replacement for silicone oil, soap, wax and powder based formulations for anti-tack and anti-stick applications.

Technical Data:

  • Color and appearance................Opaque, white to off-white emulsion
  • Dispersing medium.....................Water
  • Specific gravity............................1.01
  • Weight per gallon (lbs.)..............8.4

Application Method:

    Optimum performance in using McLube 1829 as an anti-stick/anti-tack agent for uncured rubber is achieved if McLube 1829 is diluted and applied to the rubber while it is hot. If the surface is not hot enough to dry the coating quickly, forced drying using hot air or a heat lamp is suggested. Applying McLube 1829 dilutions to uncured rubber can be accomplished by spraying, flow coating or dipping. The optimum dilution rate for McLube 1829 on uncured rubber will depend on the particular compound or process involved. Thus, some preliminary evaluations will be required to determine the lowest concentration that will furnish the desired anti-stick properties.

Safety and Handling:

    The Material Safety Data Sheet should be reviewed prior to using McLube l829. McLube 1829 has a very low order of toxicity; however, good industrial practices should be observed. Safety glasses and gloves are recommended when using this product. Freezing of the product should be avoided.


12 oz. Spray Cans, Gallon Container, 5 Gallon Pail, 55 Gallon Drums, 275 Gallon Totes


For expert technical assistance in selecting the optimum product to meet your specific requirements and to be convinced of the benefits of McLube lubricant coatings, we recommend you evaluate the appropriate product under your specific conditions. Samples and technical assistance are available, as well as custom formulations that suggest themselves for a specific application.