Plastics Waste Processors (PWPs) compress and melt ship-generated plastic waste into sanitary disks suitable for long-term storage aboard naval vessels and larger, commercial ships. PWPs are used for clean plastic waste, food-containing waste, and other ship waste that cannot be processed in the normal solid waste stream. PWPs are used by the United States Navy, other national navies, and large commercial shipping fleets to achieve compliance with the International Convention for the Prevention of Pollution from Ships (MARPOL 73/78). PWPs melt plastics and other materials in order to compress them into smaller structures that may be more easily stored aboard vessels with limited space. Plastics and other materials become tacky during the melting process and can adhere to the PWP during compression, making the sanitary disk more difficult to remove from the machine. McLube® has developed several water-based anti-stick coatings (or parting compounds) which will facilitate disk removal from the chamber and improve the overall efficiency of onboard waste management.
Plastics Waste Processors
McLube® anti-stick coatings and parting compounds prevent sticking and buildup to improve the efficiency of plastics waste processors aboard naval vessels and large, commercial ships.
About These Products
NSN: 6850-01-447-4411 – Parting Compound – A versatile anti-stick coating and parting compound | This product is VOC-free, non-toxic, and gives off no foul odors, making it ideal for confined spaces aboard large naval and commercial vessels. Suitable for dilution.
|McLube® 317 RTU|
NSN: 6850-01-447-4411 – Parting Compound – Supplied ready-to-use.
Details & Benefits
These products are applied to the door, ram, and chamber of PWPs and may be wiped, sprayed, or brushed. Two coatings are recommended, especially after the chamber and other surfaces have been cleaned. These products will condition the applied surfaces over time and generally do not need to be applied before each disk after prolonged usage. A certain amount of the coating will transfer to the disk and prevent sticking during storage. These products may be applied to hot or ambient-temperature surfaces.
- Excellent anti-stick properties
- Limit waste buildup inside the PWP over time
- Significantly reduce cleaning effort and frequency
- Extreme heat and pressure tolerances
- Unaffected by food contaminants
- Prevents rust and corrosion
- Odorless and operator-friendly
- Water-based and VOC-free
Consult a local McLube® Technical Representative to find the ideal formula available for your needs. Featured products displayed on this page from time to time are for promotional purposes only and do not represent the full product line McLube® offers for this particular material or application. Product availability, including container sizes, concentrations, and aerosols, will vary by country or region. Names of certain products may also vary slightly (prefix, suffix, etc.) depending on your location without affecting performance.
GET SAFETY DATA SHEETS (SDS)
Current and prospective customers and distributors can request an up-to-date SDS here.
Give Us A Try
Get samples of McLube Products to test inhouse. Ask about on-site trial assistance.
Get in touch with a McLube expert to discuss your process challenges here.